Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Electronics

Zipp QuickView Road Low Computer Mount
$22.00
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt
Zipp QuickView TT Computer Mount
$22.00
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
XLAB Versa Computer Mount
$32.95
Telescoping Garmin Computer Mount for Versa Plates. Raise the computer up for Refill Bottles, or lower it down to clear Standard Bottles. On-the-go tilt adjust to avoid glare. - Telescoping computer mount makes for a seamless switch between Refill or Standard Bottle - Compatible with Garmin bike computers and Multisport Watches - Requires Versa Carbon Mount or Versa Aluminum Mount Telescoping Garmin-Specific Computer Mount - Raise the computer mount up to tuck in a Refill Bottle for race day, or seamlessly lower it down for a Standard Bottle to maintain the optimal view for training days. Compatible with Garmin bike computers and multisport watches. On-the-Go Computer Tilt Adjust - Avoid changing glare with a tilt mechanism for easy adjustments while you ride Arrives Fully Assembled - Few steps required to install and head out on your first ride - Weight: 1.9oz (54g) - Construction: Nylon Composite Includes - Fully assembled computer mount - 2 screw sets: one for Versa Carbon Plates, and one for Versa Aluminum Plates Warranty: Limited Lifetime
Topeak PanoBike Bluetooth Smart Heart Rate Monitor
$79.95
Topeak's PanoBike Bluetooth Smart Heart Rate Monitor turns your smartphone, tablet, or any Bluetooth Smart Ready device into your personal trainer. With the free PanoBike app installed on your device, this water-resistant soft-sided chest strap will transmit over 1,800 hours of operation at a range up to 30 feet.
Topeak PanoBike Speed & Cadence Sensor
$59.95
Topeak's PanoBike Speed & Cadence Sensor turns your smartphone, tablet, or any Bluetooth Smart Ready device into your personal trainer. Install the free PanoBike app, or any other Bluetooth-enabled speed/cadence app, and this water-resistant easy-to-mount sensor will get over 1800 hours of operation at a range up to 30 feet, telling you exactly how fast you're going and how quickly you're pedaling.
Topeak RideCase
$59.95
The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging. - Material: Engineering grade polymer / Rubber / Machined aluminum - Includes mounts for installation on handlebar, stem, or stem cap
Topeak Ridecase
$59.95
The RideCase for iPhone has a scratch-resistant, dual-density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging. - Material: Engineering grade polymer / Rubber / Machined aluminum - Includes mounts for installation on handlebar, stem, or stem cap - Size: 15.7 x 8.2 x 1.5cm / 6.2" x 3.2" x 0.59" - Weight: 35g / 1.23oz - Added Features: Integrated flipstand for landscape or portrait viewing angle adjustable rotates for landscape or portrait viewing
Topeak Ridecase
$59.95
Works with iPhone SE(2nd Gen) / 8 / 7 The RideCase for iPhone has a scratch-resistant, dual density, non-slip, high-grade engineering polymer/rubber exoskeleton for shock and impact protection that securely holds your phone while on the go. Its unique and full-angle adjustable mount allows viewing in landscape or portrait orientation and lets you mount or remove the RideCase in seconds. An integrated flip stand allows for easy viewing off your bike and is compatible with wireless charging. - Material: Engineering grade polymer / Rubber / Machined aluminum - Mount: Included mounts for installation on handlebar, stem, or stem cap - Size: 14.4 x 7.3 x 1.4cm / 5.7" x 2.9" x 0.55" - Weight: 41.6g / 1.47oz - Added Features: Integrated flipstand for landscape or portrait viewing - Compatibility: Works with iPhone SE 2nd gen/8/7/6/6s
Topeak UTF Multi-Mount
$37.95
Up-To-Front Multi-Mount aligns everything to be mounted front and center for viewing convenience and to easily capture those precious ride moments, track your ride, and illuminate your way home from your adventure. Includes adapters for mounting GoPro/Shimano Sport Cameras, Garmin Edge/Wahoo/Sigma GPS cycle computers, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800BT, and other GoPro-mount-compatible devices. Flipflop mounts can be positioned to customize device viewing height so you can be focused and enjoy your ride! - Material: Forged aluminum / Engineering grade polymer - Modular Multi-Mount: Adapters included for GoPro / Shimano Sport Cameras, Garmin Edge / Wahoo / Sigma - Device: GPS cycle computers, Topeak CubiCubi front lights, WhiteLite 800 BT, and WhiteLite HP 500 - Bracket: Fits 25.4 – 31.8mm handlebars (shims included) - Max Load: 480g / 16.93oz - Added Features: Angle adjustment (Sport Camera), Rotates for landscape or portrait viewing (RideCase) - Weight: 52g / 1.83oz - Size: 12.5 x 6.6 x 4.3cm / 4.9" x 2.6" x 1.7"
Topeak UTF Multi-Mount for Integrated Handlebars
$32.95
An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices. - Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount - Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series - Material: aluminum / fiberglass composite - Max load: 220g - Weight: 40g (120mm) / 45g (150mm) - Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)
Sunlite Light/Computer Mount (Recumbent)
$33.59
• Fits head & derailleur tubes to mount accessories on a USS (under-seat steering) recumbent
Sigma Sport ANT+ Cadence Transmitter
$34.99
Wireless ANT+ cadence transmitter for SIGMA ROX 10 and all other ANT+ compatible devices.
Sigma Sport ANT+ Heartrate Transmitter
$49.99
Wireless ANT+ heartrate transmitter for SIGMA ROX 10 and all other ANT+ compatible devices. *Includes transmitter and soft strap
Sigma Sport Butler - GPS Out Front Mount
$24.99
Enjoy easy viewing on your Sigma Rox 10.0 GPS Unit with this out-front handlebar mount. *Note: Out Front Mount for SIGMA ROX 10.0 GPS ONLY. Will fit 31.8 mm diameter bars only.
Sigma Sport Butler - Out Front Mount
$19.99
Enjoy easy viewing with the Butler Out Front handlebar mount! Out Front Mount for following models: BC 1909 STS BC 2209 STS ROX 5.0 ROX 6.0 ROX 8 ROX 8.1 ROX 9 ROX 9.1 *Note: not for use with ROX 10.0
Sigma Sport Cadence Power Magnet
$6.99
Sigma Sport's Cadence Power Magnet is the correct replacement magnet for any Sigma Sport computer featuring cadence (computers sold separately). It attaches to your crankarm with zip ties and double-sided tape (both included).
Shimano BMDN100 Di2 Long Battery Mount for External Wiring
$135.99
Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Shimano Short Battery Mount External/Internal Wiring
$132.99
Shimano Di2 External Battery Mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Serfas Bicycle Phone Holder
$20.00
The Serfas PH-1 Bicycle Phone Holder fits mobile devices with screens 4.7 to 5.5-inches in size. It's made of soft stretchy silicone that won't scratch your device. The injection molded Nylon mount attaches easily to any size bicycle handlebars with a secure strap and single-nut adjustment system. The mount can rotate 360 degrees and locks at every 90-degree rotation for vertical or horizontal screen viewing. - Accommodates Single Mobile Device With 4.7 to 5.5 inch Screen (e.g. iPhone 8, iPhone 8 Plus, and other comparably sized devices) - Easy-To-Use Handlebar Mounting System - Silicone Holder Can Be Removed From Mount With Quick Release Tab - Size: 136mm x 46mm x 19.5mm - Materials: Silicone (Holder) / Nylon (Mount) - Weight: 51.8g
Serfas GoPro Adapter Bracket (UNI-GO2)
$6.00
Replacement/Spare Part – UNI-GO2 GoPro Adapter Bracket Allows mounting of Serfas headlights to GoPro action camera mount systems (e.g. helmet mount, handlebar mount, etc.) - Compatible with all current E-Lume and late model True Series headlights
Serfas Level 1+ Backlit Wired Speed
$30.00
See your ride data in any light condition with Serfas' Level 1+ Backlit Wired Speed Computer. It provides 9 important functions and displays your data big and bold on a backlight LED screen. Other great features include the ability to choose between kilometers or miles as well as auto start/stop, so your rides never go unrecorded. And, whether you choose handlebar or stem mounting, installation is a breeze. • backlit led • new large screen • handlebar & stem mountable • auto start/stop • km or mi selectable
Serfas Level 1.1 Wired Computer
$20.00
Easy to set up and easy to use, Serfas' 1.1 Wired Computer provides the riding functions you need and features a crystal clear display. • 9 functions • Handlebar and stem mountable • Multi-language compatible • Auto start/stop
Serfas Level 2.2 Wired Computer
$25.00
Serfas' Level 2.2 Wired Computer puts cycling knowledge at your fingertips. It provides 14 key functions controlled by 2 easy-to-use buttons, and displays your data big and bold. Other great features include a low reflection LCD and the option to select from several languages. And, whether you choose handlebar or stem mounting, installation is a breeze.
Serfas Level 3.3 Double Wireless Computer
$80.00
Serfas' Level 3.3 Double Wireless Computer puts all your helpful and important ride information at your fingertips. Controlled by 2 easy-to-use buttons it provides cadence and 15 other key functions without wires, and it displays your data big and bold. Other great features include a low reflection LCD and the option to select from several languages. And, whether you choose handlebar or stem mounting, installation is a breeze.
Serfas PH-3 3-IN-1 Accessory Holder
$45.00
3-IN-1 Handlebar Mounted Accessory Holder: 3-IN-1 Design: - Headlights - Action Cameras (GoPro) - Garmin Computers (Compatible w/ Garmin Only) - Adjustable Angle (100 Degree Tilt Up/Down) - Materials: Aluminum Alloy, Nylon - Simple Installation Specs: - Length: 105mm - Width: 68mm - Height: 57mm - Weight: 76g - Snap Ring Fitment: 31.8-32mm Bars - Max Load: 400g
SRAM QuickView Adaptor
$5.00
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
SRAM QuickView Computer Mount (MTB)
$22.00
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. It works great with computers that use a 1/4-turn twist lock interface.
SRAM QuickView Computer Mount (Road)
$22.00
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. SRAM's QuickView Computer Mount also features a center-offset design so the computer (sold separately) can be placed directly in front of the stem, or flip it to position the computer behind the bar for MTB or cyclocross use. It works great with computers that use a 1/4-turn twist lock interface.
SRAM RED 1 AXS Quarq Road Power Meter DUB
$1,200.00
In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE
SRAM RED AXS Power Meter Upgrade Kit
$819.00
- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: Ant USB
Page 1 of 7 Next page